For pilots
What to expect on your first virtual airline flight
Here's what to expect on your first virtual airline flight. You book a flight on the airline's website, load the matching aircraft at the departure gate, start tracking in the airline's ACARS client, fly the route, park at the arrival gate and file the PIREP. Staff then review it and the flight counts toward your hours.
Your first flight with a virtual airline (VA) is mostly about getting the process right, not flying perfectly. Pick an easy route, follow the steps once, and every flight after it gets simpler. Here's what happens from the moment your account is approved.
Before you book: three things to do
Read the pilot guide
Your VA will have rules: which aircraft you can fly at your rank, whether time acceleration is allowed, what landing rate is acceptable, and if you must fly on an online ATC network. Five minutes reading these now saves a rejected PIREP later. How to join a virtual airline covers choosing an airline in the first place.
Install the airline's ACARS client
Your airline will name the ACARS client it uses. Install it, sign in with your airline account, and open it once with your simulator running to check it connects. If you're not sure what ACARS does, see what ACARS is in flight simulation.
Choose a short, familiar first flight
Your first flight is a test of the process, so keep the flying easy:
- 60 to 90 minutes is the length we'd suggest. Long enough to see every phase, short enough to finish in one sitting.
- An aircraft you already know. Your first VA flight isn't the time to learn a new cockpit.
- Airports you know, with decent weather if you can choose.
Your airline may limit new pilots to a few aircraft anyway, so check what your rank allows.
Step by step: the first flight
1. Book the flight
On the airline's website, find a route from the schedule or the airport you're based at and book it (some airlines call this a bid). The booking tells the ACARS client your flight number, route and aircraft.
2. Plan the flight
Create a flight plan for the route with a flight planning tool, or use the route the airline provides. Note your planned fuel, cruise altitude and the expected flight time. Fuel planning for sim pilots explains how much fuel to load and why.
3. Set up the simulator
Load the booked aircraft at a gate or parking spot at the departure airport. Don't start on the runway: the taxi belongs in the record, and starting at the gate gives you proper block times. Load the fuel from your plan and set the payload if your aircraft allows it.
4. Start tracking before you move
Open the ACARS client, pick your booked flight and start tracking while you're still parked. Starting tracking after pushback or, worse, after takeoff is the first-flight mistake we'd most want you to avoid. If tracking starts late, part of the flight is missing and staff may reject it.
5. Fly the flight
Push back, taxi, take off and fly your route as normal. The client records everything in the background. A few things to avoid while tracking is running:
- Slew mode or moving the aircraft with the map
- Time acceleration, unless your airline allows it
- Overspeeding below 10,000 ft, which your airline may check for
- Closing the ACARS client
6. Land and taxi to the gate
Fly the approach, land, and taxi to a gate or stand. Your landing rate is recorded, and your airline may set a limit for what's acceptable. Don't chase a perfect number on your first flight; a safe, firm landing is fine. What is a good landing rate has the bands we use.
7. Shut down and file the PIREP
Stop at the gate, set the parking brake and shut the engines down. Wait for the client to register that you've arrived, then submit the PIREP. Add a short comment if anything unusual happened. What is a PIREP explains what's in the report.
After you file
Your PIREP goes to the airline for review. At some VAs it's accepted automatically if it passes set checks; at others a staff member looks at every one, which can take a day or two. Once accepted, the flight appears in your logbook and counts toward your hours and next rank.
If it's rejected, read the reason, fix whatever caused it, and ask staff if it isn't clear. Treat it as a process lesson: the fix is usually easy to apply next time.
First-flight mistakes to avoid
| Mistake | What happens | How to avoid it |
|---|---|---|
| Started tracking after pushback | Taxi and block times are missing | Start tracking at the gate |
| Flew a different aircraft than booked | PIREP doesn't match the booking | Load the aircraft on your booking |
| Spawned on the runway | No taxi-out recorded | Start at a gate or stand |
| Landed at the wrong airport | Flight doesn't match the route | Fly to the booked arrival, or explain a diversion in your comments |
| Closed the client early | Arrival never recorded | Wait until the client shows you've arrived |
| Used time acceleration | Flagged by staff | Check your airline's rules first |
If something goes wrong mid-flight
Sims crash and connections drop. What to do depends on your client, but the general approach is the same:
- The sim stutters or freezes briefly: wait. A good client rides out a short gap.
- The sim crashes: reload the aircraft at the same position, then check whether the client can resume the flight.
- You can't recover it: tell staff. Your airline may accept a manual report or let you refly it.
Frequently asked questions
How long should my first virtual airline flight be?
We'd suggest around 60 to 90 minutes. It covers every phase of flight without needing a long session if something goes wrong.
Can I fly default aircraft with a virtual airline?
That's up to your airline. Some restrict certain routes to specific add-on aircraft, so check the fleet list in the pilot guide.
Can I use the autopilot on my first virtual airline flight?
Unless your VA's rules say otherwise, yes. Autopilot use is normal at real airlines too. Hand-fly as much as you're comfortable with, and check whether your airline asks for anything specific on approach or landing.
What if I forget to start ACARS before takeoff?
Your airline may reject or query a flight that started tracking mid-air. Ask staff whether to file it or refly it.
Do I need to fly the whole flight in one go?
Not always. Some clients let you pause and carry on later. Check your airline's rules on paused flights before relying on it.
Where Stratos fits
If your airline uses Stratos, you pick your airline (or enter an invite code) on first launch, sign in, then open the Flight Tracking plugin, select your booked flight and click Start Tracking. When you're parked at the gate you click Submit, or turn on Auto-Submit Flight so the PIREP files itself once the engines are off at the destination. The getting started guide covers each step, and Stratos is free to download for Windows, macOS and Linux.
Stratos by Skyvex Software
Free ACARS for every pilot.
On Windows, macOS and Linux.
Stratos reads Microsoft Flight Simulator and X-Plane directly. Continuous telemetry, a landing score from the raw data, and the PIREP filed before you leave the cockpit.